View 0295_961520.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SD2067 (Tentative)
Silicon NPN epitaxial planer type
6.90.1 1.05 2.50.1 0.05
Unit: mm
(1.45) 0.8
0.5 4.50.1
For low-frequency output amplification
0.15
0.7
4.0
q q q q q
Darlington connection. High foward current transfer ratio hFE. Large peak collector current ICP. High collector to emitter voltage VCEO. Allowing supply with the radial taping.
0.45-0.05
0.45-0.05
+0.1
+0.1
2.50.5 1 2
2.50.5 3
s Absolute Maximum Ratings
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature
*
(Ta=25C)
Ratings 120 100 5 3 2 1 150 -55 ~ +150 Unit V V V A
Symbol VCBO VCEO VEBO ICP IC PC* Tj Tstg
Note: In addition to the lead type shown in the upper figure, the type as shown in the lower figure is also available.
1:Emitter 2:Collector 3:Base MT2 Type Package
1.20.1
A W C C
0.45+0.1 - 0.05
0.65 max.
2.50.1
(HW type)
Printed circuit board: Copper foil area of 1cm2 or more, and the board thickness of 1.7mm for the collector portion
Internal Connection
C B
200
E
s Electrical Characteristics
Parameter Collector cutoff current Emitter cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Base to emitter saturation voltage
*1h FE
(Ta=25C)
Symbol ICBO IEBO VCBO VCEO VEBO hFE
*1
Conditions VCB = 25V, IE = 0 VEB = 4V, IC = 0 IC = 100A, IE = 0 IC = 1mA, IB = 0 IE = 100A, IC = 0 VCE = 10V, IC = IC = 1A, IB = 1A*2 IC = 1A, IB = 1mA*2 1mA*2
min
typ
max 0.1 1
120 100 5 4000 40000 1.5 2
*2
14.50.5
s Features
0.65 max.
1.0 1.0
0.2
Unit A A V V V
VCE(sat) VBE(sat)
V V
Rank classification
Q R S 4000 ~ 10000 8000 ~ 20000 16000 ~ 40000
Pulse measurement
Rank hFE
1
Transistor
PC -- Ta
1.2 3.0 Printed circut board: Copper foil area of 1cm2 or more, and the board thickness of 1.7mm for the collector portion. Ta=25C 2.5 IB=180A 150A 2.0 120A 90A 1.5 60A
2SD2067
IC -- VCE
Collector to emitter saturation voltage VCE(sat) (V)
10
VCE(sat) -- IC
IC/IB=1000
Collector power dissipation PC (W)
1.0
Collector current IC (A)
3 25C 1 Ta=100C -25C 0.3
0.8
0.6
0.4
1.0
0.1
0.2
0.5
30A
0.03
0 0 20 40 60 80 100 120 140 160
0 0 2 4 6 8 10
0.01 0.01
0.03
0.1
0.3
1
3
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Collector current IC (A)
VBE(sat) -- IC
105
hFE -- IC
Ta=100C
Cob -- VCB
Collector output capacitance Cob (pF)
VCE=10V 60 IE=0 f=1MHz Ta=25C
Base to emitter saturation voltage VBE(sat) (V)
100
IC/IB=1000
Forward current transfer ratio hFE
50
25C 104 -25C
30
40
10
103
30
3 Ta=-25C 1 100C 0.3
25C
20
102
10
0.1 0.01
0.03
0.1
0.3
1
3
10 0.01 0.03
0 0.1 0.3 1 3 10 1 3 10 30 100
Collector current IC (A)
Collector current IC (A)
Collector to base voltage VCB (V)
Area of safe operation (ASO)
10 3 ICP IC 1 t=1s 0.3 0.1 0.03 0.01 0.003 0.001 0.1 Single pulse Ta=25C t=10ms
Collector current IC (A)
0.3
1
3
10
30
100
Collector to emitter voltage VCE (V)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 0295

	To Download 0295 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .